J2K100 User’s Manual
Page B10 Appendix B – Application Note Revision 1.1
This configuration requires two additional drops or stubs from the J1939 trunk or backbone to
the Maretron J2K100s. You should follow the engine/genset manufacturer’s instructions for
adding the drop, which are generally specified to be 1 meter or less in length.
For illustration purposes, the J1939 network in Figure 8 shows the J2K100 drops or stubs (i.e.,
connection between J1939 network and Maretron J2K100s) as a two wire or twisted pair cable.
The network wiring actually requires three wires, two CAN bus signals (usually designated
CAN-H and CAN-L, usually yellow and green respectively) and a ground used as a reference
(usually designated as CAN-SHLD). Refer to SAE J1939-11 and J1939-15 for recommended
practices in connecting CAN-H, CAN-L, and CAN-SHLD.
After completing the physical connections, you will need to configure the J2K100’s so they
respond to the appropriate J1939 engines/gensets. Most dual engine installs have the port
engine J1939 address set to 0 and the starboard engine J1939 address set to 1, but not
always, so check with the engine manufacturer and use a Maretron NMEA 2000
®
display
(DSM200/DSM250) to program the J2K100s with the corresponding J1939 address. On the
NMEA 2000
®
side, most dual engine displays are looking for the NMEA 2000
®
instance to be
set to 0 for the port engine and the NMEA 2000 instance set to 1 for the starboard engine.
Again, you can use a Maretron display to program the appropriate NMEA 2000
®
instances.
Refer to the J2K100 User’s Manual (Section 2.5) for a description of configuring a J2K100.
4.5 Two Engines/Gensets, Dual J1939 Network Installation
Figure 9 shows a two engines/gensets, dual J1939 network installation diagram.
Figure 9 – Two Engines/Gensets, Dual J1939 Network Installation Diagram
J1939
Engine
J1939
Display
J1939
Engine
J1939 Network #1
J1939 Network #2
Maretron Micro Female Field
Attachable Connector Included
with J2K100 (M8A5000-32DN)
User Supplied Cable/Connector
Compatible with Engine/Genset
Manufacture Cabling System
Maretron Micro Female Field
Attachable Connector Included
with J2K100 (M8A5000-32DN)
Maretron J1939 to
NMEA 2000
®
Gateway (J2K100)
Maretron J1939 to
NMEA 2000
®
Gateway (J2K100)
NMEA 2000
Network
J1939 Network
(23 strony)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji