SIM 100
Switch Indicator Module monitors switch
closure devices including, but not limited to, safety
equipment (e.g., heat, smoke, carbon monoxide, explosive
vapor detectors), security systems (e.g., motion, vibration,
glass break, door and port hole magnetic switches), and
vessel monitoring equipment (e.g., valve closed/open, high
water bilge). The SIM100 continually monitors these switch
closure devices and broadcasts information over the NMEA
2000® network about the switch state so the crew can be
alerted to potential conditions or problems that warrant
further investigation. Advanced features of the SIM100
include the ability to detect whether or not power has been disconnected from the monitored device or if the
signal wires have been disconnected due to either corrosion, tampering, or for any other reason (if the monitored
device is so equiped).
RAA100
is used to adapt commercially available resistive rudder senders to the NMEA 2000®
network. This allows you to observe rudder angle anywhere on the vessel where there are NMEA
2000® compatible displays such as the Maretron DSM150 or DSM250.
TMP100
measures the temperature for up to 6 temperature probes and reports the information over
an NMEA 2000® network. The TMP100 supports up to 4 thermistor probes and 2 high temperature
thermocouple probes. Optional thermistor probes (-20°C to 80°C or -4°F to 176°F) cover a wide range
of applications including cabin air temperature, engine room air temperture, refrigerator/ freezer
temperature, under bolt temperature (inverters, charges, pumps, motors, etc.), tank temperatures
(live well bait, hot water, etc.), and air duct temperatures. The optional thermocouple probes (0°C to
900°C or 32° to 1652°F) are used to measure Exhaust Gas Temperature (EGT) as part of a
comprehensive fuel management system.
Vessel Data Recorder (VDR100)
is used to record messages transmitted from every
product interconnected on the vessel’s NMEA 2000® network. Each message is stored using solid-
state memory technology with simple data retrieval via a removable USB flash drive. The supplied 16
Gbyte USB Flash Drive will hold weeks or more of data, and with the optional purchase of a larger
USB Flash Drive, a year or more of data can be stored. And you never have to worry about losing the
most recent data because the VDR100 uses a circular buffer where the oldest data is overwritten
only after the entire memory is filled
Data Recorded on Solid State Memory via Removable USB Flash Drive
• Circular Buffer Preserves Latest Recorded Data while Oldest Data Overwritten when Memory is Full
• Recorded Data Available for Performance Analysis, Vessel Tracking, Preventive Maintenance, and
More
• Optional Waterproof USB Flash Drive Cover
• Free Data Extraction Software (N2KExtractor™) Builds Comma Delimited Files for your
customized Data Analysis
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji